EVERYTHING 20% OFF, Use Coupon Code: ALL20 or, Get 30% OFF orders of $100 or more, Code: ALL30

  Home > AR Parts & Accessories > Gas Block and Gas Tube >

V Seven Weapons Titanium .750 Diameter Gas Block Pin-On

V Seven Weapons .750 inch Diameter Titanium Pin-On Low Profile Gas Block for AR-15/M4 in Raw Titanium or Black Finish at Vertex Ops

Additional Photos

OUR PRICE: $66.00

Sale Price: $63.00

Saving You: $3.00

NOTE: The Stock Status shown below is ONLY for the item model of the first option listed.

Models of the other options may be In-Stock and can be added to your cart ONLY if they are In-Stock.

STATUS: Out of Stock

Ships the SAME or NEXT Business Day When In-Stock

Item Call Sign (Part #):

Titanium Gas Block Color*:

V Seven Weapons Titanium .750 Diameter Pin-On & Set Screw Low Profile Gas Block for AR-15 barrels. This high quality Titanium gas block is lightweight and low profile to fit under just about much any rail out there.

Secured to the barrel with one set screw and one pin. The pinhole is only partially drilled out, proper installation requires drilling of the gas block and barrel while the gas block is secured to it using the set screw.

Installation by a certified gunsmith is highly recommended.

Available Finishes: Raw Satin Titanium or Ion Bond Black

Weight: 22 Grams or .776 Ounce

Length: 1 inch

Model: GEN 1 Non-Fluted

Advantages Over Mil-Spec or Standard Steel Gas Blocks
  1. Titanium's thermal expansion coefficient is nearly half that of steel. This gives the added advantage of a tighter seal and more secure fit as the rounds go down range and the temperature rises.
  2. Weight Savings, Approximately 45% Lighter
  3. Unique Color for a Custom Look
  4. Corrosion Resistant
  5. Secured to Barrel Using Two Methods: 1 Set Screw & 1 Pin
  6. This Pin-On gas block allows you to secure the gas block to the barrel with one set screw before drilling out the gas block the rest of the way and the grove in the barrel for the pin to be installed.

  • Constructed from Heat Treated Titanium
  • Socket Set Screw Included. Featuring a Knurled Tip Design for a More Secure Hold on the Barrel.

Manufacturer Part #'s
Raw Titanium:
Ion Bond Black: T.750P-BLK

NOTE: Please confirm the diameter gas block needed for your barrel before purchasing. In general, .750 diameter gas blocks are more common but low profile or lightweight contour barrels such as the V7 Light Contour and Daniel Defense Lightweight Barrels require this smaller .625 diameter gas block. Returns for installed and/or drilled gas blocks will not be accepted.



Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 9 Write a Review for this Product »

  0 of 0 people found the following review helpful:
5 of 5 Overall happy May 29, 2018
Reviewer: Tony Hyder from Grovetown, GA United States  
Recieved quickly once it shipped. I think their shipping time from order to out the door could be improved. Other than that quite happy with the product and price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 V7 titanium gas block April 16, 2017
Reviewer: Stanton Oshiro from Hilo, HI United States  
Nice piece, very nice, no issues on quality or on install. Took a few ounces off the front of my AR which is always a good thing!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Super lightweight! February 21, 2016
Reviewer: Anonymous Person from Woodinville, WA United States  
I bought the V7 titanium gas block for a lightweight build and I'm very pleased with how much lighter it is over a standard low profile gas block.  The fit is nice and snug without any excess play.  The finish is also very nice, consisting of a bead blasted finish similar to the finish found on most stainless steel barrels.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 V7 gas block February 11, 2016
Reviewer: Mike from United States  
Very well machined gas block. Great part is a pilot hole has already been started on the gas block. This makes pinning the gas block that much easier using a drill press. Gas block also comes with a set screw and roll pin not a taper pin.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 V seven gas block August 22, 2015
Reviewer: Adam Freeman from Lawrenceville, IL United States  
Fast delivery, great products. I will do business with you again. Anyone who is in the middle of a build should look here. Products are even nicer in hand then in the pictures.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

AR Parts & Accessories > Gas Block and Gas Tube
Manufacturer > V Seven Weapons
AR Parts & Accessories
Color > Grey / Silver / Stainless
Lightweight Parts
Color > Titanium
Color > Black
Clearance & SALE Items

Copyright ©  Vertex Ops Corp.. All Rights Reserved. Built with Volusion